The holder is made of imported high strength material andhas high wear resistance after special treatment
The shank is connected with the spindle of the machine,and the front end is used in conjunction with vanous intemal cone dril chucks
| 型ModelNo. DIN69871.A-NO.S-L1 | L2 mm | L mm | D mm | D1 mm | 拉杆 Drawbar thread |
| DIN69871.A40-J0-32 | 11.112 | 111.5 | 6.35 | 44.45 | M16 |
| DIN69871.A40-J1-32 | 16.669 | 117 | 9.754 | 44.45 | M16 |
| DIN69871.A40-J2-32 | 22.225 | 122.6 | 14.199 | 44.45 | M16 |
| DIN69871.A40-J2S-32 | 19.05 | 119.5 | 13.940 | 44.45 | M16 |
| DIN69871.A40-J3-32 | 30.956 | 131.4 | 20.599 | 44.45 | M16 |
| DIN69871.A40-J4-32 | 42.069 | 142.5 | 28.550 | 44.45 | M16 |
| DIN69871.A40-J5-32 | 47.625 | 148 | 35.890 | 44.45 | M16 |
| DIN69871.A40-J6-32 | 25.4 | 125.8 | 17.170 | 44.45 | M16 |
| DIN69871.A40-J33-32 | 25.4 | 125.8 | 15.850 | 44.45 | M16 |
| DIN69871.A40-B6-32 | 10 | 110.4 | 6.35 | 44.45 | M16 |
| DIN69871.A40-B10-32 | 145 | 114.9 | 10.094 | 44.45 | M16 |
| DIN69871.A40-B10-45 | 14.5 | 127.9 | 10.094 | 44.45 | M16 |
| DIN69871.A40-B12-32 | 18.5 | 118.9 | 12.065 | 44.45 | M16 |
| DIN69871.A40-B12-80 | 18.5 | 166.9 | 12.065 | 44.45 | M16 |
| DIN69871.A40-B16-26 | 24 | 118.4 | 15.733 | 44.45 | M16 |
| DIN69871.A40-B16-32 | 24 | 124.4 | 15.733 | 44.45 | M16 |
| DIN69871.A40-B16-45 | 24 | 137.4 | 15.733 | 44.45 | M16 |
| DIN69871.A40-B18-32 | 32 | 132.4 | 17.780 | 44.45 | M16 |
| DIN69871.A40-B18-45 | 32 | 145.4 | 17.780 | 44.45 | M16 |
| DIN69871.A40-B22-32 | 40.5 | 140.9 | 21.793 | 44.45 | M16 |
| DIN69871.A40-B24-32 | 50.5 | 150.9 | 23.825 | 44.45 | M16 |
| DIN69871.A50-B16-45 | 24 | 170.75 | 15.733 | 69.85 | M24 |
| DIN69871.A50-J3-45 | 30.965 | 177.7 | 20.599 | 69.85 | M24 |
| DIN69871.A50-J6-45 | 25.4 | 172.1 | 17.170 | 69.85 | M24 |
| DIN69871.A50-J33-45 | 25.4 | 172.1 | 15.850 | 69.85 | M24 |
| DIN69871.A50-B16-45 | 24 | 170.8 | 15.733 | 69.85 | M24 |
| DIN69871.A50-B18-45 | 32 | 178.8 | 17.780 | 69.85 | M24 |
| DIN69871.A50-B22-60 | 40.5 | 202.3 | 21.793 | 69.85 | M24 |
| DIN69871.A50-B24-60 | 50.5 | 212.3 | 23.825 | 69.85 | M24 |
Other Products
According to needs to be possible to provide the balanced hilt, the standard precision is G6.3/12000rpm. the precise precision is G2.5/20000rpm.
Navigation
Navigation
Contact Us
Tel: +86 534 425 1888
Mob/ Wechat: +86 137 9138 1619
E-mail: jacksun@ht-tools.net
WhatsApp: +86 137 9138 1619
Add.:East Area of Economic Development Area, Pingyuan County, Shandong Province. China 253100
Send in Inquiry
Send in Inquiry
