Home - Products-BT30 BT40 BT50 HSK63 HSK100 Spindle test bar Spindle Drawbar Force Gauge Draw bar Puller test Gauge

BT30 BT40 BT50 HSK63 HSK100 Spindle test bar Spindle Drawbar Force Gauge Draw bar Puller test Gauge

Spindle Force Dynamometer ※ Product Features: Hydraulic mechanical structure, high stability ※ Specifications Instructions: 1. Verify pull force gauge bolt specifications on with four claw specifications correspond. 2. Rally and the front spindle taper portion wipe clean, Rally to clamp.

Next Product Inquire Now

Order No	Measurement Range	Reference Tension Range	Weight KG
BT30	0-150Kg/cm2	200-500	4.2
BT40	0-150Kg/cm2	500-1100	4.3
BT50	0-350Kg/cm2	1500-2200	6.7

The impact of abnormal pull value

1. If the pull value is too large: 
It is easy to cause damage to the broach mechanism claw and the shank pull pin.

2.If the pull value is too small:
When the spindle broach is rotated, the inner claw cannot grasp the bolt due to insufficient pulling force. At this time, when the machining is easy, the spindle that is rotated by the shank is thrown out, which is likely to cause operator injury, and the accuracy of the spindle and the sheet metal of the machine bed are damaged.

BT30 BT40 BT50 HSK63 HSK100 Spindle test bar Spindle Drawbar Force Gauge Draw bar Puller test Gauge